Why does my Daewoo Vacuum Cleaner have low suction?
Low suction or poor pick-up in your Daewoo Vacuum Cleaner can occur due to several reasons: - The dust compartment might be full, in which case you should empty it. - The filters could be clogged, so check and clean them. - The power setting may be too low; press the Min/Max Power Button to increase it.
What to do if my Daewoo Vacuum Cleaner doesn't turn on?
If your Daewoo Vacuum Cleaner fails to turn on, it could be due to the following reasons: - The internal battery might not be charged, so you should charge it. - The charger might not be properly plugged into the mains socket. Ensure the charger is fully inserted and the socket is switched on.
How to fix a hissing sound in my Daewoo Cyclone Freedom Pro Vacuum Cleaner?
A hissing sound in your Daewoo Vacuum Cleaner usually indicates that the airflow is restricted. To resolve this: - Empty the dust compartment. - Check and clean the filters. - Clear any blockages if necessary.
General| Charge Time | 4 hours |
|---|---|
| Weight | 2.5 kg |
| Cord Length | Cordless |
| Noise Level | 78 dB |
| Filters | HEPA |
| Type | Cordless Stick Vacuum Cleaner |
| Dust Capacity | 0.3 liters |
Lists and identifies the principal components of the vacuum cleaner unit.
Lists and identifies the various accessories supplied with the vacuum cleaner.
Step-by-step guide for charging the internal battery before first use.
Instructions for connecting the aluminum tube and floor tool to the main unit.
Guide on how to swap between carpet and hard floor brush types for the motorized floor tool.
How to activate the cleaner and modify suction power levels during use.
Steps for starting and finishing vacuum cleaning operations.
Instructions for using the floor tool directly without the extension tube.
How to use the crevice tool for edges and upholstery tool for fabrics.
Guide for using the motorized stair tool effectively on stairs.
Procedure for emptying the dust container when it reaches the maximum level.
Steps to detach the motor housing for access to internal components.
Instructions on how to remove, wash, and dry the HEPA and cyclonic filters.
Guide on correctly placing back the filters and securing the motor housing.
Advice on cleaning the exterior and general usage recommendations.
Details on how often to clean the HEPA and cyclonic filters.
Key technical details including power, battery, weight, and dimensions.
Information on how to contact customer support for queries and parts.
Solutions for issues where the vacuum fails to power up.
Addresses causes of reduced suction and how to fix them.
Explains potential causes for "hissing" sounds and their resolution.
Outlines the terms and conditions of the initial product guarantee.
Instructions for validating the additional 2-year extended warranty.
To Next Page