Cyclone Freedom Pro 22.2V Cordless Vacuum
FLR00040
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
4. Twist the Motor Housing (11) in the
direction of the arrow shown right
and remove.
4. Rotate the Conical Hepa Filter
(2) anticlockwise and remove it
from the Dust Compartment (4).
Lift out the Cyclonic Filter (2)
from the Dust Compartment (4).
6. Wash the Conical Hepa and Cyclonic
Filters (2) in warm running water until
clean. Allow the filters to dry thoroughly
for 24 hours before reuse.