The Daewoo Hurricane CAT 5 Carpet Washer is an 800W upright carpet cleaner designed for effective carpet maintenance and freshening. This appliance is specifically engineered to tackle light levels of dirt and refresh carpets, making it an ideal tool for household use. It is important to note that this device is not intended to function as a conventional dry vacuum cleaner, and attempting to use it as such may cause damage.
Function Description
The primary function of the Hurricane CAT 5 is to clean carpets using a solution of water and carpet cleaning shampoo. It operates by dispensing a cleaning solution onto the carpet, which is then agitated by a scrubbing bar to loosen dirt and stains. Following the application and agitation, the machine extracts the dirty solution from the carpet, leaving it cleaner and refreshed. This process is particularly effective for removing embedded dirt and revitalizing the appearance of carpets. The device also features an upholstery tool attachment, extending its cleaning capabilities to stairs, upholstered furniture, and other hard-to-reach areas, providing a versatile cleaning solution for various surfaces within the home.
Usage Features
Operating the Daewoo Hurricane CAT 5 is designed to be straightforward and user-friendly. Before beginning, users must assemble the handle to the main unit using the provided screws, ensuring it is securely attached without overtightening to prevent thread damage. The appliance is equipped with a solution tank for clean water and cleaning solution, which is easily filled by lifting a cap and pouring in warm water (up to 40°C) and an appropriate low-foaming commercial carpet cleaning solution. It is crucial to use only recommended solutions, such as Daewoo Carpet & Upholstery Shampoo, as incorrect solutions can lead to excessive foaming and potential damage to the machine. The solution tank has a 'MAX' mark to guide users in preventing overfilling, which could cause spillage or leakage. The dirty water tank also has a 'MAX' mark, indicating when it needs to be emptied to prevent permanent damage to the appliance.
Before cleaning, it is recommended to prepare the carpet by removing furniture and thoroughly vacuuming it with a regular vacuum cleaner. A colorfastness test should be performed on a small, inconspicuous area of the carpet to ensure no color bleeding occurs with the cleaning solution. To operate, the user unwinds the mains cable, plugs the unit into a socket, and steps on the handle release pedal to lower the handle into the cleaning position. The on/off pedal then activates the carpet washer. To dispense the cleaning solution, the user presses the solution release trigger while pushing the carpet washer forwards. Releasing the trigger and pulling the cleaner backward along the same path allows the machine to extract the dirty solution. This forward and backward motion, with and without solution release, is repeated to clean the desired areas. For heavily soiled areas, a separate stain remover may be used prior to general cleaning. When using the upholstery tool, the user lifts a flap at the front of the cleaner, inserts the tool, and presses its trigger to release solution while drawing it over the surface, then releases the trigger to extract the dirty solution. It is advised to work from back to front across a room to avoid stepping on wet carpet and to avoid saturating the carpet, using no more than two sets of forward and backward paths, always finishing with a drying path. After cleaning, ample drying time is necessary, and increasing air circulation can aid this process. Once completely dry, a final vacuum with a conventional cleaner is recommended.
Maintenance Features
Proper maintenance is key to ensuring the longevity and optimal performance of the Daewoo Hurricane CAT 5. The most critical maintenance step is to always disconnect the carpet washer from the mains power supply before any cleaning or maintenance tasks. The exterior of the appliance should be cleaned with a clean, damp cloth, avoiding harsh or abrasive cleaners and never submerging the unit in water or other liquids.
A crucial part of routine maintenance involves cleaning the scrubbing bar after each use. To do this, the carpet washer is turned upside down, and the scrubbing bar is removed by pressing two catches at the front and rear. Care must be taken not to lose the connecting pin that fits between the bar and the cleaner. The scrubbing bar should be washed thoroughly in warm water and allowed to dry completely before being refitted. When refitting, the catches are pressed, and the bar is pushed back into place, ensuring the connecting pin is correctly inserted into its hole.
Emptying and cleaning the dirty water tank is another essential maintenance step. Once the dirty water reaches the 'MAX' mark, the tank must be emptied. This is done by pushing down the dirty water tank release catch and removing the tank from the carpet washer. The rubber 'Quick Spout' at the top of the tank is lifted to pour out the dirty water, and the tank is then thoroughly rinsed with warm water before being replaced on the carpet washer. It is important not to continue using the carpet washer if the 'MAX' mark in the dirty water tank has been reached, as this can cause permanent damage.
For storage, the mains cable should be neatly wrapped around the adjustable cable tidy on the back of the appliance. Crucially, the carpet washer should never be stored with water in either tank. Both the clean solution tank and the dirty water tank must be rinsed out and allowed to dry thoroughly before storing the appliance to prevent mildew, odors, or damage. Adhering to these maintenance guidelines will help keep the Daewoo Hurricane CAT 5 in excellent working condition and ensure effective cleaning results for years to come.