- 67 -
Operation Section
1. Park in an authorized area only. Do not block
traffic.
2. Place the transmission controls in NEUTRAL.
3. Engage the parking brake.
4. Lower the forks to the ground.
Blocking the wheels will prevent unexpected lift
truck movement, which could cause personal
injury.
5. Turn the key in the ignition switch to the OFF
position and remove the key.
NOTE : If a LP - Gas equipped lift truck is stopped
or parked for an indefinite or prolonged period of
time, close the fuel shutoff valve on the LP-Gas
tank. Run the engine until fuel in the line runs out
and the engine stops. Turn off the ignition switch
and disconnect switch (if equipped).
6. Actuate each loading lever several times to
remove the residual
pr
essure in the respective
cylinders and hoses.
To Next Page
Loading...
Need help?
General
