Daewoo DACNQ740S - Page 23

WARNING! Unauthorized modications and/or accessories may lead to serious
injury or death to the user or others. Under no circumstances may the design
of the machine be modied without the permission of the manufacturer.
Do not modify this product or use it if it appears to have been modied by others.
Never use a machine that is faulty. Carry out the safety checks, maintenance and
service instructions described in this manual. Some maintenance and service
measures must be carried out by trained and qualied specialists. See instruc-
tions under the Maintenance heading.
Always use genuine accessories.
WARNING! This machine produces an electromagnetic eld during operation.
This eld may under some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical implant manufacturer
before operating this machine.
Work area safety
- Observe your surroundings to ensure that nothing can affect your control of the machine.
- Ensure that no one/nothing can come into contact with the cutting equipment or be hit by parts
thrown by the blade.
- Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold,
etc. Working in bad weather is tiring and can lead to dangerous conditions, e.g. slippery surfaces.
- Never start to work with the machine before the working area is clear and you have a rm foothold.
Look out for any obstacles with unexpected movement. Ensure when cutting that no material can
become loose and fall, causing injury to the operator.Take great care when working on sloping
ground.
- Ensure that the working area is sufciently illuminated to create a safe working environment.
- Make sure that no pipes or electrical cables are routed in the working area or in the material to be
cut.
- If cutting into a container (drum, pipe, or other container) you must rst make sure it does not
contain ammable or other volatile material.
WARNING! The safety distance for the power cutter is 15 metres (50 foot). You are
responsible to ensure that animals and onlookers are not within the working
area. Do not start cutting until the working area is clear and you are standing rmly.
21