- The cutting head is now loose and can be removed from the machine. Remove the belt from the
belt pulley.
- Rotate the bearing housing to opposite direction and reassemble the stop.
5. FUEL HANDLING
General
WARNING! Running an engine in a conned or badly ventilated area can result in
death due to asphyxiation or carbon monoxide poisoning. Use fans to ensure proper
air circulation when working in trenches or ditches deeper than one meter.
Fuel and fuel fumes are ammable and can cause serious injury when inhaled or
allowed to come in contact with the skin. For this reason observe caution when
handling fuel and make sure there is adequate ventilation.
The exhaust fumes from the engine are hot and may contain sparks which can start
a re. Never start the machine indoors or near combustible material!
Do not smoke and do not place any hot objects in the vicinity of fuel.
16
To Next Page