- Check the air lter and replace if necessary.
Replacing the air lter
- Loosen the screws. Remove the cover.
- Replace the air lter.
Drive gear, clutch
- Check the clutch centre, drive gear and clutch spring for wear.
Water delivery system
- Check the nozzles on the bladeguard and the lter in the water connection for clogging and clean
as necessary.
Disposal, scrapping
This product should be submitted to an appropriate recycling station in accordance with local
requirements.
By ensuring that this product is taken care of correctly, you can help to counteract the potential
negative impact on the environment and people that can otherwise result through the incorrect
waste management of this product.
For more detailed information about recycling this product, contact your municipality, your domestic
waste service or the shop from where you purchased the product.
CAUTION! Unhealthy dust can be spread during lter change. Wear approved
respiratory protection. Dispose of lters correctly.
NOTICE! The air lter must not be cleaned or blown clean with compressed air. This will
damage the lter.
37
To Next Page