6
Checking the blade and the blade guard
- Check that the guard over the culling blade is not cracked or damaged in any other way. Replace
when damaged.
- Check that the cutting blade is tted correctly and does not show signs of damage. A damaged
culling blade can cause personal injury.
Vibration damping system
Your machine is equipped with a vibration damping system that is designed to minimize vibration
and make operation easier.
The machine's vibration damping system reduces the transfer of vibration between the engine
unit/cutting equipment and the machine's handle unit. The engine body, including the cutting equip-
ment, is insulated from the handles by vibration damping units.
Checking the vibration damping system
Check the vibration damping units regularly for cracks or deformation. Replace them if damaged.
Check that the vibration damping element is securely attached between the engine unit and handle
unit.
To Next Page
Loading...