28
To move the seat:
• Turn key to STOP position and set the parking brake.
• Sit in seat Flip the seat adjustment lever in left orientation.
• While holding the lever, slide the seat to the desired
position.
• Release the lever and make sure the seat is lock in position
before operating the mower.
Engaging the parking brake
• Fully depress and hold the brake pedal, and depress the
parking brake at the same time. Or rstly depress the
parking brake, then fully depress the brake pedal.
• Release the brake pedal.
• Release the parking pedal.
• Turn off the machine and take out the key.
• If you need to unlock the parking brake, depress the brake
pedal forcefully and hear a “click” or the parking brake
pedal bounces, indicating that the unlocking is successful.
Note: The mower starts,the brake in lock state,blade not
working, the engine will not shut down when person leaves
the seat. In any other case, once person leaves the
seat,the engine shut down.
EN
To Next Page
Loading...
