29
Setting the cutting deck height
Before using the riding mower, raise the height of the cutter head to the
most suitable cutting position for your lawn.
• Stop the mower and disengage blades.
• Turn key to STOP position and press the parking brake.
• To raise the cutting deck, grasp the deck height adjustment
lever, push left to disengage from slot, move toward the
back of the mower, then push right into slot to secure.
• To lower the cutting deck, grasp the deck height adjustment
lever, push left to disengage from slot, move toward the
front of the mower, then push right into slot to secure.
Note: When setting the height of the cutter head, grasp the
handle of the height adjustment lever, only when it is xed
Release your hand only when you are in the required card
slot. If the adjustment lever is released quickly, it may cause
a danger of squeezing or pulling the operator’s hand.
To Next Page
Loading...
