51
Using a feeler gauge, set the gap to 0.75mm( 0.030”). Ret
the spark plug (22)taking care not to overtighten.
Replace fuse
• The electrical start is protected with a 5 A fuse.
• Never use another fuse or bypass the fuse.
Battery Pack and Charger
Damp areas can cause corrosion of terminals and electrical
contacts. If stored for long periods in high temperatures (120°
F / 50° C), perma-nent damage to the battery pack can
result. Check electrical terminals and contacts on battery
packs and charger. Wipe with clean cloth or blow clean with
compressed air.
After storage, a normal charge may be required. To
check available charge, press the Battery Fuel Gauge
button and charge if required. See the Bat-tery Fuel Gauge
section.
Tyre pressure:
Check the tyre pressure prior to starting!
To Next Page
Loading...
