Need help?Do you have a question about the Daewoo DATM80110 and is the answer not in the manual?
General| Power Source | Petrol |
|---|---|
| Working Width | 80 cm |
| Working Depth | 30 cm |
| Engine Type | 4-stroke |
| Fuel Tank Capacity | 3.6 L |
| Tilling Width | 80 cm |
| Tilling Depth | 30 cm |
| Transmission | Chain drive |
| Engine Displacement | 212 cc |
User's duty for tiller maintenance and safety device functionality.
Importance of reading instructions and controls before operation.
Steps for protective gear and work area inspection before use.
Warning about petrol's high flammability and explosive nature.
Importance of reading labels/notes for hazard awareness and safety.
Suitable soil types and slope gradients for tiller operation.
Labeled diagram identifying key tiller components.
Procedure for checking/filling engine oil to prevent damage.
Checking transmission gear oil level and adding if low.
Inspecting the air cleaner for dirt or obstructions.
Using automotive gasoline and avoiding contamination.
Turn on fuel valve, close choke lever before starting.
Procedure for turning the engine switch to ON.
Move throttle lever right before starting engine.
Correct technique for pulling starter grip to start engine.
Adjusting handlebar height for comfortable operation.
Adjusting tilling depth using drag bar and hitch pin.
Engaging/disengaging clutch for power transmission.
Shifting transmission into different gear positions.
Procedure for stopping engine quickly in emergency.
Steps for stopping engine during normal operation.
Move throttle lever right to stop engine.
Turning engine switch to OFF position.
Schedule for regular inspection and service of tiller components.
Instructions for draining and refilling engine oil.
Cleaning and servicing air cleaner element.
Procedure for cleaning fuel strainer cup.
Steps for preparing tiller for long-term storage, including fuel draining.
Common problems and checks when engine fails to start.
Detailed technical data and specifications for the tiller.
Visual representation of all parts with numerical references.
To Next Page
