RESET
If the clock is dead (the display doesn’t work) during seƫ ng, please
use a slim but blunt object (like ball pen pointer, toothpick etc.) to
press RESET hole, then the clock will return to the iniƟ al mode.
BACKLIGHT
Press SNOOZE key on the top of the clock at any Ɵ me, the backlight
will be lightened.
MAINTENANCE
- The baƩ eries should be replaced if the display screen or alarm
becomes dysfuncƟ onal or weak.
- Please use a soŌ cloth or a paper towel to clean the clock.
- Do not use any corrosive cleanser or chemical soluƟ ons on the clock.
STATEMENT OF COMPLIANCE:
Flamagas, S.A. declares product DCD-23 complies with the essenƟ al
protecƟ ve requirements and objecƟ ves of:
• EMC DirecƟ ve 89/336/EC
To check the enƟ rely declaraƟ on of conformity of this model, visit
www.electronicafl amagas.com
GUARANTEE
This product is guaranteed against all manufacturing defects for 2
years from the date of purchase. If the care advice and instrucƟ ons
contained in this manual are not followed the guarantee will be
automaƟ cally void. For this guarantee to be valid, it is necessary to
present the original receipt or invoice.
Exclusive importer Flamagas SA. www.fl amagas.com
DCD-23
EN
To Next Page
Loading...