10
(Fig.1d&1h)
5.Fix the cable holders.(Fig.1e)
6.Grass collecton box assembly. Assemble three halves and x them
together.(Fig.1f)
7.Lift the ap and place the grass box over the lugs.(Fig.1g)
CUTTING HEIGHT ADJUSTMENT
To obtain the desired cutting height, the front and rear axles are
repositioned on the underside of the mower housing.
WARNING! Disconnect the mower from the power supply and ensure
the blade has stopped coasting before adjusting the height.
1.To raise the blade height, grasp the height adjustment lever and move
EN
To Next Page
Loading...
