9
Debris may be ejected from the discharge chute.
The tines will continue to rotate for a short while after the rake
has been switched off.
Do not pick up or carry the rake until the tines has stopped rota
ting.
This product is double insulated electrically.
The tines will continue to rotate for a short while after the rake
has been switched off.
Do not pick up or carry the rake until the tines has stopped rota
ting.
Disconnect from mains power immediately if the power cord
becomes damaged.
Beware of sharp blades. Blades continue to rotate after the mo
tor is switched off.
Remove plug from mains before maintenance or if cord is da
maged.
Keep supply exible cord away from cutting mains.
4. ASSEMBLY INSTRUCTIONS
PREPARATION:
1.Put the cable hook on upper handle.(Fig.1a)
2.Connect upper and lower handles with supplied screws and clips.
(Fig.1b)
3.Connect lower handles and the housing with supplied screws and
clips.(Fig.1c)
4.Fit each wheels over the axles and press the wheel covers into place
To Next Page
Loading...
