it toward the back of mower.position.
2.To lower the blade height, grasp the height adjustment lever and
move it toward the front of mower.
5. OPERATING
Connect to power supply
WARNING! Before connecting to the mains supply, always check the
switch is in off position. Connect the plug into the RCD protected
power supply.
Starting
On/Off switch g.3)
Caution! Do not start the mower if it is standing in long grass. Press the
safety button (A) of the switch assembly and then pull the switch lever
(B) against the bar. Keep the switch lever held whilst releasing the safe-
ty button. To stop the mower release the switch lever and it automatica-
lly returns to its off position.
11
To Next Page
Loading...
