12
Mowing (g.4)
We recommend to use your mower as outlined in this section in order
to achieve optimum results and to reduce the risk of cutting the mains
cable.
• Place the bulk of the mains cable on the close to the starting point.
• Switch the mower on as described above.
• Proceed as shown in g.4
• Move from position 1 to position 2
• Turn right and proceed towards position 3
• Turn left and move towards position 4
• Repeat the above procedures as required.
WARNING! Do not work towards the cable.
Blade maintenance(g.5)
• Regularly remove grass and dirt from the blade.
EN
To Next Page
Loading...
