• At the beginning of the gardening season, carefully examine the
condition of the blade.
• If the blade is very blunt, sharpen or replace the blade.
• f the blade is damaged or worn, t a new blade.
If the blade is slipping, put the screwdriver into the location hole,
tighten the blade by wrench. see g.6 and g.7
WARNING! Observe the following precautions:
• Disconnect the mower from the mains and wait until the blade has
stopped rotating before proceeding.
• Be careful not to cut yourself. Use heavy-duty gloves or a cloth to
grip the blade.
• Only use the specied replacement blade.
• Do not remove the impeller (A) for any reason.
To replace the blade:
• Turn the mower onto its side.
• Place blade xing set into shaft of motor
• Place blade alignly
• Place blade screw into the holes
• Tighten blade screw with sleeve.
13
To Next Page
Loading...
