-25-
SERVICE MODE
5-1-2.Description of SERVICE MODE ITEM
A.S1(1) : Heat-Run Key
B.S2(2) : Gumi Channel Map Write
C.S3(3) : Volume Test
=> This key can check sound
D.S4(4) : EDIT WRITE
=> Using this key, you can up data EDID data. (but the “shunt”must be
connected, and only executed in the Factory.)
E.S5(5) : PANEL TEST
=> Using this key, you can test problem of PANEL, as confirm white pattern
red pattern, blue pattern, green pattern.
F.S6(6) : PICTURE TEST
=> Using this key, you can test brightness, contrast and color.
G.S7(7): DEMPOL CHANNEL MAP WRITE
H.S8(8) : White Balance adjustment
=> Using this key, you can adjust White balance.
I.S9(9) : Device control
=> This key only use for R&D.
J.S10(10) : Opion key
=> Using this key, you can adjust SSC, Dimming, panel Type and etc.
K.S11(11) : Version key
=>Using this key, you can identify the information of the S/W of the set.
L.S12(SLEEP ) : Shipping key
=> Using this key, you can up at shipping mode.
To Next Page
Loading...
Need help?
General
