24
MENU
M
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
Picture Mode Dynamic
Brightness 41
Contrast 51
Colour 31
Sharpness 31
Tint
R G
0
N.R. Off
Colour Temp Normal
Move Select Exit
Picture
Screen
Sound
Install
Function
DVB
Picture Mode Dynamic
Brightness 41
Contrast 51
Colour 31
Sharpness 31
Tint
R G
0
N.R. Off
Colour Temp Normal
Move Select Exit
Picture
Screen
Sound
Install
Function
DVB
Method To Use
Basic Menu
Basic Menu
- The basic menu appears on the screen if you press the “MENU” button of the remote control.
- There are 6 items Picture, Screen, Sound, Install, Function and DVB in the basic menu.
- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward.
1. Press the “MENU” button.
• The main menu appears if you press the “MENU” button.
2. Press the “/“ button.
• You may setup according to the directions on
the screen after selecting the desired item by
pressing the “/“ button.
• If the setup is completed, exit from the menu
by pressing the “MENU” button.
Picture : Adjusts Picture Mode, Brightness, Contrast, Colour, Sharpness and Tint (NTSC only),
N.R. (Picture Noise Reduction) and Colour Temperature.
Screen : Adjusts Aspect, PC (activated on PC mode only) and PiP (Picture in Pictire)
Sound : Adjusts AVC (Automatic Volume Control), Dynamic Bass, Effect, Balance and Equal-
izer.
Install : Adjusts Auto Tuning, Manual Tuning, Setup and Edit.
Function : Adjusts Language, Child Lock, Clock, Wake Up, Wake Time and Wake Pr.
DVB : Adjusts DVB Menu and Software Update (activated on DVB-T only).
To Next Page
Loading...
