ENG
11
FM FREQUENCY RANGE
In radio o mode, press & hold the [ETM] button with either
87~108 or 76~108 displays to select your desired frequency
range.
IMPORTANT MATTERS FOR USING BATTERIES
1. If no battery has been installed within a few seconds, the
clock of the radio will stop working. However, those pre-
stored frequencies are still kept. The clock will work again
after new batteries are installed.
2. When the battery power is low, the “ “ symbol on
the display will ash to alert you to exchange to new
batteries. It will turn o automatically when the power
is gone.
3. Mixing the used & new batteries may cause damage to the
radio and also display the power capacity incorrectly.
4. In case the radio will not be used for a long period, take
out the batteries to prevent liquid leakage that may
damage the radio.
SPECIFICATIONS
1. Frequency Range: 87.0 - 108.0 MHz/ 76~108 MHz
2. Sensitivity (S/N=30dB): < 3μV
3. Signal Selection > 60dB (±200 kHz)
4. S/N Ratio: > 55dB
5. FM Stereo crosstalk: >25dB
6. Output(distortion 10%): ≥100 mW
7. Alarm mode: by radio
8. Quiescent Current: <17 mA
Standby Current: <50μA
9. Speaker: 40 mm/16Ω/500 mW
10. Earphone: 3.5mm /32Ω
11. Power Source: 2x R03 (AAA)
12. Dimensions Appro: 100 x 60 x 17mm
13. Weight: 70 g (excl. Battery)
To Next Page
Loading...