14
7. Caller-ID Functions (CLIP)
The handset displays the telephone numbers of incoming calls. This
function is only possible if you have subscribed to a telephone operator
that provides this service.
Contact your telephone provider for more information. When you receive
a call, the numbers are saved in a Call list. This list can hold 20
telephone numbers (each of max. 23 digits). If the number is longer than
14 digits, you can press the key to show the other digits.
7.1 New calls
When you’ve received a new unanswered call, the display will show ‘XX
MISSED’ and ‘XX’ indicates the number of calls missed.
7.2 Consulting the call list
1. Press key. The last received call is shown on the display.
2. NOTE: If the list is empty, ‘EMPTY’ is shown on the display. If
not, you can see the name, number and date / time.
3. Pressing the key the following will be shown on the display.
You can scroll from name to number and date time by pressing
the button. Use key to scroll to the next call. Use
key to show the previous call.
4. You can leave the Call list by pressing the key.
7.3 Calling a number from the call list
Scroll through the Call list until the desired number is shown on the
display.
Press key. The number will be dialled automatically.
7.4 Erasing a number from the call list
Scroll through the Call list until the desired number is shown on the
display.
To Next Page
