18
If you press and hold key for 2 seconds you can talk with
the 2
nd
handset and external line at the same time (conference
call). Press the key to end the call.
10.2 Internal call (intercom)
1. In standby press key followed by the number (1-5) of the
other handset.
2. The other handset will start to ring. You can stop the ringing by
pressing the key or key.
3. If the other handset answers the call by pressing the key
you can talk internally.
4. Press key to end the call.
11. Reset of the Handset
This will undo all changes and set back all default settings (ringer volume,
ringer melody, etc...).
1. Press key. Use or keys to scroll to ‘HANDSET’
and press key.
2. Use or keys to scroll to ‘RESET’ and press key.
3. Enter the PIN code ‘0000’ and press key. The unit will go
back to standby.
12. Base Setting
12.1 Setting the dialling mode
There are two types of dialling mode:
DTMF / Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To Next Page
Loading...
