Daewoo DTD 7200 - Call Log Functions; Base and Handset Settings; Base Settings

23
 DEL RECORD
Press △ or ▽ key to select DEL RECORD item. This function allows the user to delete a phonebook entry.
 DELETE ALL
Press △ or ▽ key to select DELETE ALL item. This function allows the user to delete all phonebook
entries.
 MEM STATUS
Press △ or ▽ key to select MEM STATUS (memory status) item. If show 10/50, it means total 50 records
can be stored in the phonebook and 10 records has been stored in it already.
Handset Menu function 2: CALL LOG
You can enter CALL LOG by pressing
key. And there are three items in this menu, MISSED,
RECEIVED and DIALED.
When LCD display CALL LOG
1) Press
key to enter missed call lists, received call lists or dialed call lists.
2) The LCD will show the last record. (If no entries are available in the list, the LCD will be shown
EMPTY).
3) Press △ or ▽ key to view other record.
4) When the desired number is show, press
key to dial out the number automatically.
When the record is show, press
key, use △ or ▽ key to choose, press key to confirm
ADD TO PB: this function allows the user to add an entry from the caller list to the phone book.
DELETE : this function allows the user to delete the currently selected entry from caller list
DELETE ALL : this function allows the user to delete all numbers
Note: In idle state, press △ key once to incoming records or press ▽ key to review outgoing records.
Handset Menu function 3: BS SETTINGS
The user is able to change the base setting in base settings item, press
key and use △ or ▽ key to
select this item. Then you can do below:
 DELETE HANDSET
This function allows the user to delete a handset registration from the base.
1) Press
key, the first show is DELETE HS.
2) Press
key to enter, the user will be prompted to enter the PIN code.
3) Input the correct 4-digit pin code using digit key.
4) Press △ or ▽ key to scroll the handset names list up and down.
5) Press
key to confirm. The delete handset will be deleted from the list on registered handset on
the base, and the handset will behave according to the out of range condition.
NOTE: Press and keep
key for 6 s, then press key 7 times swiftly. Then the handset has logout the
base successfully.
 DIAL MODE
The user can select to change the mode in which the base will dial.
1) Press
key, then press △ or ▽ key to select DIAL MODE item.
2) Press
key to enter, and the display shows TONE.
3) Press △ or ▽ key to select the TONE or PULSE dial mode.
4) Press
key to confirm your selection.