E-25
Guide for other useful programs
(cont.)
NOTE
• The water temperature selecting is possible during this process.
1
Put the laundry into the Drum and put softerner into the detergent case.
Then close the Door.
• Softener should be below ‘MAX’ level.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Press the ‘RINSE+SPIN’ button.
• ‘800’ rpm spin speed and ‘COLD’ water temperature are selected automatically.
• If you want to change Spin condition, press each corresponding button.
4
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
* RINSE+SPIN (FOR DWD-LD141X)
Downloaded From WashingMachine-Manual.com Manuals
To Next Page
Loading...
