To Next PageTo Next PageWhat to do if water supply is not stopped in Daewoo DWC-ED1213?
If the water supply to your Daewoo Washer won't stop, the issue might stem from several components. A broken pressure switch necessitates changing the Sensor Pressure. Alternatively, a broken pressure hose requires replacing the defective parts. In some instances, a malfunctioning or poorly assembled inlet valve also calls for replacement of the Inlet- Valve.
Lists key features and benefits of the washing machine, such as capacity and NANO technology.
Details components of the control system, including Main PCB, Front PCB, and Noise Filter.
Lists components involved in the drum's movement, such as lifter, motor, and bearings.
Details various water inlet valves and the inlet box assembly used in the machine.
Lists components related to the door, including the glass, hinge, and lock mechanism.
Lists components specific to the drying system, such as the heater and fan.
Details components responsible for heating water during the wash cycle.
Lists components of the draining system, including the pump and hoses.
Details supporting components like the base and dampers.
Details the parts of the control panel assembly and their corresponding numbers.
Lists and illustrates parts for the lower panel assembly.
Explains how the PCB determines water level and spin start based on load.
Describes the process of balancing laundry load during spin cycles.
Explains the working principle of the door lock switch and its operation.
Details the system for opening the door, including normal and abnormal conditions.
Explains how to activate and deactivate the child lock function.
Details the steps and conditions for the drain process, including error indications.
Describes the process for testing PCB and electronic parts without water supply.
Explains the procedure for continuous testing of various machine functions.
Troubleshooting for inlet valve issues, causes, check points, solutions, and error codes.
Troubleshooting for pressure switch problems, including error codes and frequency checks.
Details troubleshooting for door lock switch failures, diagnosis, and replacement methods.
Covers troubleshooting for heater and thermistor failures, including error modes and diagrams.
Explains BLDC motor components, magnetic flow, and driving mechanism.
Details the components and function of the optional dry system, including diagrams.
Addresses common problems and solutions for the dry system's heater, thermistor, and fuse.
Lists and illustrates the parts required for installation, including screws and wrenches.
Details the step-by-step process for installing the drum washing machine and adjusting its level.
General