To Next PageTo Next PageHow to fix Daewoo Washer that won't spin?
If your Daewoo Washer isn't spinning, check if the clothes in the drum are collected on one side, ensure the washer is installed on an even floor and that vibration isn't excessive, and verify that the door is closed. The lamp ā ā will light up if the door is open.
What to do if water in my Daewoo Washer does not drain?
If the Daewoo washer is not draining water, begin by cleaning and straightening the drain hose to ensure it is free from kinks or clogs. If the problem persists, clean the drain filter.
Why door of my Daewoo Washer does not open?
Once the Daewoo washer has started, the door cannot be opened for safety reasons.
How to fix a Daewoo DWD-FD1411 Washer that does not drain?
If the water in your Daewoo Washer isn't draining or is draining slowly, the drain hose may be kinked or clogged. Clean and straighten the drain hose to resolve this. Alternatively, the drain filter may be clogged, so clean the drain filter as well.
Why is my Daewoo Washer making a vibrating noise?
If your Daewoo washer is making a vibrating noise, ensure all transit bolts and packing have been removed, referring to the Installation Guide if needed. Also, make sure all the feet are resting firmly on the ground. If the noise continues, the wash load may be unevenly distributed; stop the washer and rearrange the load.
How to resolve E9 error on Daewoo DWD-FD1411 Washer?
If your Daewoo washer is displaying the E9 error, the water level sensor is an inferior product. You should change the water level sensor.
What to do if my Daewoo DWD-FD1411 displays H2 error?
If your Daewoo washer is displaying the H2 error, the thermistor wash is an inferior product or has broken down. Change the thermistor wash.
How to fix PFE error on Daewoo DWD-FD1411 Washer?
If your Daewoo washer displays the PFE error and stops during spinning due to too much or unsuitable detergent: 1. Turn off the power of the washing machine. 2. Press the Power button. 3. Press the SPIN button.
How to fix OE error on Daewoo DWD-FD1411 Washer?
If you see the OE error on your Daewoo washer, it means the drain hose is kinked or clogged. You should clean and straighten the drain hose.
How to resolve UE error on Daewoo Washer?
If your Daewoo washer is displaying the UE error, it means the laundry is concentrated to one side of the drum during spin. To fix this, rearrange the laundry.
General| Drying Capacity | 6 kg |
|---|---|
| Energy Efficiency Class/Energy Rating | A |
| Spin Speed | 1400 rpm |
| Weight | 70 kg |
| Type | Washer Dryer |
| Programs | Cotton, Rinse, Spin |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
