To Next PageTo Next PageWhy is my Daewoo DWD-FD1412 making a rattling noise?
If your Daewoo washer is making a rattling or clanking noise, there might be foreign objects like coins or safety pins in the drum or pump. Stop the washer and check the drum and filter.
What to do if water in my Daewoo Washer does not drain?
If the Daewoo washer is not draining water, begin by cleaning and straightening the drain hose to ensure it is free from kinks or clogs. If the problem persists, clean the drain filter.
Why door of my Daewoo DWD-FD1412 Washer does not open?
Once the Daewoo washer has started, the door cannot be opened for safety reasons.
How to fix a Daewoo DWD-FD1412 that does not drain?
If the water in your Daewoo Washer isn't draining or is draining slowly, the drain hose may be kinked or clogged. Clean and straighten the drain hose to resolve this. Alternatively, the drain filter may be clogged, so clean the drain filter as well.
Why is water not entering my Daewoo Washer properly?
If the water is not entering the Daewoo washer or is entering slowly, check if the water supply is adequate by checking another tap. Ensure the water supply tap is fully open and that the water inlet hose is not kinked. Also, inspect the filter of the water inlet for clogs.
How to troubleshoot H5 error on Daewoo DWD-FD1412?
If your Daewoo washer is displaying the H5 error, the water temperature is over 45°C in the delicate & wool course. Change the thermistor wash.
How can I fix H6 error on my Daewoo DWD-FD1412?
If your Daewoo washer is displaying the H6 error, the heater wash does not work. Change the heater wash.
What to do if my Daewoo Washer shows E2 error?
If your Daewoo washer is displaying the E2 error, the water is being supplied continuously due to an inferior valve inlet. You should change the valve inlet.
How to fix PFE error on Daewoo Washer?
If your Daewoo washer displays the PFE error and stops during spinning due to too much or unsuitable detergent: 1. Turn off the power of the washing machine. 2. Press the Power button. 3. Press the SPIN button.
How to solve LE error on Daewoo Washer?
If your Daewoo washer is displaying the LE error, it means the Start/Hold button is pressed while the door is opened. Close the door.
General| Spin Speed | 1400 rpm |
|---|---|
| Energy Efficiency Class/Rating | A |
| Noise Level (Washing) | 56 dB |
| Number of Programs | 15 |
| Type | Washer Dryer |
| Dimensions (H x W x D) | 850 x 595 x 590 mm |
Appliance fitted with transit bolts to prevent internal damage during transport.
Guidance on the proper location and clearance for installing the washing machine.
Instructions for connecting the water inlet hose to the appliance.
Guidelines for correctly installing the drain hose for proper water drainage.
Procedure to ensure the washing machine is level to prevent noise and vibration.
Instructions for cleaning the exterior and interior of the washing machine.
Steps to prevent damage to the washer when stored in freezing temperatures.
Procedure for cleaning the water inlet filter to prevent 'IE' error messages.
Guide to cleaning the drain filter to ensure smooth machine operation.
How to clean the detergent case and inlet box recess.
Advice on cleaning the washing drum to prevent limescale and rust.
Steps to remove and replace the door lock switch assembly.
Procedure for accessing and removing the heater and thermistor components.
Instructions for disassembling the BLDC motor.
Steps for removing the drain pump from the washing machine.
Exploded view and parts list for the box inlet assembly.
Exploded views and parts lists for front panel assemblies across various models.
Detailed part codes for PCB assemblies (Dongsuh and Newmotech).
Exploded views for cabinet front, cabinet, tub, and plate assemblies.
Explanation of buttons and programs on the control panel for DWD-FD141X models.
Explanation of buttons and programs on the control panel for DWD-FD145X models.
Explanation of buttons and programs on the control panel for DWD-F147X models.
Diagram showing the sequence of washing operations for different courses.
Detailed sequence chart illustrating the 'Islamic Rinse' option.
Procedures for checking PCB, water level frequency, spinning, and durability tests.
Methods for testing the spinning speed and repetitive operation of the washer.
