What to do if my Daewoo Washer shows E2 error?
If your Daewoo washer is displaying the E2 error, the water is being supplied continuously due to an inferior valve inlet. You should change the valve inlet.
How to solve LE error on Daewoo Washer?
If your Daewoo washer is displaying the LE error, it means the Start/Hold button is pressed while the door is opened. Close the door.
How to fix PFE error on Daewoo Washer?
If your Daewoo washer displays the PFE error and stops during spinning due to too much or unsuitable detergent: 1. Turn off the power of the washing machine. 2. Press the Power button. 3. Press the SPIN button.
What does PFE error mean on Daewoo DWD-FD1412 Washer?
If your Daewoo washer is displaying the PFE error, it could be due to several reasons: - The drain pump filter is clogged: Clean the drain pump filter. - A large amount of detergent was used: Use the proper amount of detergent.
What does E4 LEAKAGE ERROR mean on Daewoo Washer?
An E4 LEAKAGE ERROR on your Daewoo Washer indicates that water is leaking from the tub or the hose drain. Check for leaks in these areas and replace the tub or hose drain as needed.
What does H4 THERMISTOR WASH OVERHEATING ERROR mean on Daewoo Washer?
An H4 THERMISTOR WASH OVERHEATING ERROR on your Daewoo Washer can occur if the heater worked without water in the tub, so check the water level. It can also indicate that the thermistor wash is defective or broken, so change the thermistor wash.
Why is my Daewoo DWD-FD1412 leaking water?
If your Daewoo washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer. If the issue persists, your house drain pipes may be clogged, try to unclog them or contact a plumber.
What to do if the door of my Daewoo DWD-FD1412 Washer does not open?
Once a wash cycle has started on your Daewoo Washer, the door cannot be opened for safety reasons. Wait two minutes after the cycle has ended to allow the electric locking mechanism time to release before attempting to open the door.
How to fix a Daewoo DWD-FD1412 that does not drain?
If the water in your Daewoo Washer isn't draining or is draining slowly, the drain hose may be kinked or clogged. Clean and straighten the drain hose to resolve this. Alternatively, the drain filter may be clogged, so clean the drain filter as well.
Why door of my Daewoo DWD-FD1412 Washer does not open?
Once the Daewoo washer has started, the door cannot be opened for safety reasons.
Appliance fitted with transit bolts to prevent internal damage during transport.
Guidance on the proper location and clearance for installing the washing machine.
Instructions for connecting the water inlet hose to the appliance.
Guidelines for correctly installing the drain hose for proper water drainage.
Procedure to ensure the washing machine is level to prevent noise and vibration.
Instructions for cleaning the exterior and interior of the washing machine.
Steps to prevent damage to the washer when stored in freezing temperatures.
Procedure for cleaning the water inlet filter to prevent 'IE' error messages.
Guide to cleaning the drain filter to ensure smooth machine operation.
How to clean the detergent case and inlet box recess.
Advice on cleaning the washing drum to prevent limescale and rust.
Steps to remove and replace the door lock switch assembly.
Procedure for accessing and removing the heater and thermistor components.
Instructions for disassembling the BLDC motor.
Steps for removing the drain pump from the washing machine.
Exploded view and parts list for the box inlet assembly.
Exploded views and parts lists for front panel assemblies across various models.
Detailed part codes for PCB assemblies (Dongsuh and Newmotech).
Exploded views for cabinet front, cabinet, tub, and plate assemblies.
Explanation of buttons and programs on the control panel for DWD-FD141X models.
Explanation of buttons and programs on the control panel for DWD-FD145X models.
Explanation of buttons and programs on the control panel for DWD-F147X models.
Diagram showing the sequence of washing operations for different courses.
Detailed sequence chart illustrating the 'Islamic Rinse' option.
Procedures for checking PCB, water level frequency, spinning, and durability tests.
Methods for testing the spinning speed and repetitive operation of the washer.
General| Spin Speed | 1400 rpm |
|---|---|
| Energy Efficiency Class/Rating | A |
| Noise Level (Washing) | 56 dB |
| Number of Programs | 15 |
| Type | Washer Dryer |
| Dimensions (H x W x D) | 850 x 595 x 590 mm |
To Next Page