N
Nicole DiazSep 3, 2025
How to troubleshoot E7 error on Daewoo Washer?
- CCory ZunigaSep 4, 2025
If your Daewoo washer is displaying the E7 error, the motor is spinning in the opposite direction. Change the PCB ASS or the motor.
To Next PageTo Next PageHow to troubleshoot E7 error on Daewoo Washer?
If your Daewoo washer is displaying the E7 error, the motor is spinning in the opposite direction. Change the PCB ASS or the motor.
What to do if water in my Daewoo DWD-FD1413 does not drain?
If the Daewoo washer is not draining water, begin by cleaning and straightening the drain hose to ensure it is free from kinks or clogs. If the problem persists, clean the drain filter.
Why door of my Daewoo DWD-FD1413 Washer does not open?
Once the Daewoo washer has started, the door cannot be opened for safety reasons.
Why is my Daewoo DWD-FD1413 leaking water?
If your Daewoo washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer. If the issue persists, your house drain pipes may be clogged, try to unclog them or contact a plumber.
How to fix IE error on Daewoo DWD-FD1413?
If your Daewoo washer is displaying the 'IE' error, it could be due to a closed water tap. Open the water tap. Alternatively, the filter of the valve inlet may be clogged, clean the filter of the valve inlet.
How to fix OE error on Daewoo DWD-FD1413?
If you see the OE error on your Daewoo washer, it means the drain hose is kinked or clogged. You should clean and straighten the drain hose.
What should I do if my Daewoo DWD-FD1413 Washer shows H8 error?
If your Daewoo washer is displaying the H8 error, the heater worked without water in the tub. Check the water level.
How to resolve PFE error on Daewoo DWD-FD1413?
If your Daewoo washer is displaying the PFE error, the drain pump does not work during spin. Change the drain pump.
What should I do if my Daewoo Washer shows E6 error?
If your Daewoo washer is displaying the E6 error, the laundry is jammed between the gasket and the drum. Rearrange the laundry.
What to do if my Daewoo DWD-FD1413 shows E2 error?
If your Daewoo washer is displaying the E2 error, the water is being supplied continuously due to an inferior valve inlet. You should change the valve inlet.
General| Capacity | 10 kg |
|---|---|
| Washing Capacity | 10 kg |
| Drying Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Energy Rating | A |
| Noise Level (Spinning) | 75 dB |
| Type | Washer Dryer |
| Programs | Cotton, Delicate, Hand Wash, Intensive, Mix, Quick, Rinse, Spin, Synthetic, Wool |
Steps to remove transit bolts to prevent damage during transport.
Guidelines for selecting a suitable location and ensuring proper leveling.
Detailed instructions for attaching the water inlet hose to the tap.
Proper methods for installing the drain hose for sink or tub.
How to adjust the machine's feet for stability and quiet operation.
Procedures for cleaning the outside and inside of the washing machine.
Instructions to prevent damage from freezing temperatures.
Steps for cleaning the water inlet filter.
Steps for cleaning the drain pump filter.
How to clean the detergent dispenser.
How to clean the washing drum to prevent limescale and rust.
Step-by-step guide to remove and replace the door lock switch.
Procedures for disassembling the heater and thermistor components.
Instructions for removing the BLDC motor assembly.
Steps to remove and access the drain pump unit.
Exploded view and part list for the water inlet box assembly.
Explanation of Power, Start/Hold, Temperature, and Spin controls.
Details on Rinse Hold, Spin Only, and Option selections like Pre-Wash.
How to use Time Save and Time Delay features.
How to activate Child Lock and select programs using the dial.
Visual representation of wash cycle steps and timings for different programs.
Details on the sequence chart for the Islamic Rinse function.
Method to enter test modes for checking PCB and operations.
How to check water level frequency and test valve operations.
Procedures for running spinning and durability tests on the machine.
Troubleshooting common symptoms like noise, leaks, and operational errors.
Explains error messages (IE, OE, UE, etc.) and their causes/solutions.
