To Next Page
J
Julie GoldenSep 1, 2025
How to troubleshoot E7 error on Daewoo DWD-FD1412 Washer?
- CChristopher LeonardSep 1, 2025
If your Daewoo washer is displaying the E7 error, the motor is spinning in the opposite direction. Change the PCB ASS or the motor.
How to troubleshoot E7 error on Daewoo DWD-FD1412 Washer?
If your Daewoo washer is displaying the E7 error, the motor is spinning in the opposite direction. Change the PCB ASS or the motor.
How to resolve E9 error on Daewoo Washer?
If your Daewoo washer is displaying the E9 error, the water level sensor is an inferior product. You should change the water level sensor.
What to do if my Daewoo Washer displays H2 error?
If your Daewoo washer is displaying the H2 error, the thermistor wash is an inferior product or has broken down. Change the thermistor wash.
How to troubleshoot H5 error on Daewoo DWD-FD1412?
If your Daewoo washer is displaying the H5 error, the water temperature is over 45°C in the delicate & wool course. Change the thermistor wash.
How can I fix H6 error on my Daewoo DWD-FD1412?
If your Daewoo washer is displaying the H6 error, the heater wash does not work. Change the heater wash.
What should I do if my Daewoo Washer shows H8 error?
If your Daewoo washer is displaying the H8 error, the heater worked without water in the tub. Check the water level.
How to resolve PFE error on Daewoo DWD-FD1412 Washer?
If your Daewoo washer is displaying the PFE error, the drain pump does not work during spin. Change the drain pump.
What to do for IE WATER INLET ERROR in Daewoo Washer?
An IE WATER INLET ERROR on your Daewoo Washer can be caused by several issues. First, check if the water tap is closed and open it. If that's not the problem, the filter of the valve inlet may be clogged, so clean it. Other potential causes include a defective valve inlet (change the valve inlet), a faulty water level sensor (change the water level sensor), the drain motor working during water supply (change the drain motor), or the PCB ASS’Y not checking the water level (change the PCB ASS’Y).
What does LE DOOR OPEN ERROR mean on Daewoo DWD-FD1412 Washer?
An LE DOOR OPEN ERROR on your Daewoo Washer can be triggered if the Start/Hold button is pressed while the door is open, so close the door. It can also indicate a faulty switch door lock (change the switch door lock) or the PCB ASS’Y not checking the door lock (change the PCB ASS’Y).
Why is my Daewoo DWD-FD1412 making a vibrating noise?
If your Daewoo washer is making a vibrating noise, ensure all transit bolts and packing have been removed, referring to the Installation Guide if needed. Also, make sure all the feet are resting firmly on the ground. If the noise continues, the wash load may be unevenly distributed; stop the washer and rearrange the load.
Appliance fitted with transit bolts to prevent internal damage during transport.
Guidance on the proper location and clearance for installing the washing machine.
Instructions for connecting the water inlet hose to the appliance.
Guidelines for correctly installing the drain hose for proper water drainage.
Procedure to ensure the washing machine is level to prevent noise and vibration.
Instructions for cleaning the exterior and interior of the washing machine.
Steps to prevent damage to the washer when stored in freezing temperatures.
Procedure for cleaning the water inlet filter to prevent 'IE' error messages.
Guide to cleaning the drain filter to ensure smooth machine operation.
How to clean the detergent case and inlet box recess.
Advice on cleaning the washing drum to prevent limescale and rust.
Steps to remove and replace the door lock switch assembly.
Procedure for accessing and removing the heater and thermistor components.
Instructions for disassembling the BLDC motor.
Steps for removing the drain pump from the washing machine.
Exploded view and parts list for the box inlet assembly.
Exploded views and parts lists for front panel assemblies across various models.
Detailed part codes for PCB assemblies (Dongsuh and Newmotech).
Exploded views for cabinet front, cabinet, tub, and plate assemblies.
Explanation of buttons and programs on the control panel for DWD-FD141X models.
Explanation of buttons and programs on the control panel for DWD-FD145X models.
Explanation of buttons and programs on the control panel for DWD-F147X models.
Diagram showing the sequence of washing operations for different courses.
Detailed sequence chart illustrating the 'Islamic Rinse' option.
Procedures for checking PCB, water level frequency, spinning, and durability tests.
Methods for testing the spinning speed and repetitive operation of the washer.
General| Spin Speed | 1400 rpm |
|---|---|
| Energy Efficiency Class/Rating | A |
| Noise Level (Washing) | 56 dB |
| Number of Programs | 15 |
| Type | Washer Dryer |
| Dimensions (H x W x D) | 850 x 595 x 590 mm |
