What to do if the door of my Daewoo DWD-FD1412 Washer does not open?
Once a wash cycle has started on your Daewoo Washer, the door cannot be opened for safety reasons. Wait two minutes after the cycle has ended to allow the electric locking mechanism time to release before attempting to open the door.
Why is my Daewoo DWD-FD1412 leaking water?
If your Daewoo washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer. If the issue persists, your house drain pipes may be clogged, try to unclog them or contact a plumber.
How to fix IE error on Daewoo DWD-FD1412 Washer?
If your Daewoo washer is displaying the 'IE' error, it could be due to a closed water tap. Open the water tap. Alternatively, the filter of the valve inlet may be clogged, clean the filter of the valve inlet.
How to fix OE error on Daewoo DWD-FD1412?
If you see the OE error on your Daewoo washer, it means the drain hose is kinked or clogged. You should clean and straighten the drain hose.
How to resolve UE error on Daewoo Washer?
If your Daewoo washer is displaying the UE error, it means the laundry is concentrated to one side of the drum during spin. To fix this, rearrange the laundry.
How to fix PFE error on Daewoo Washer?
If your Daewoo washer displays the PFE error and stops during spinning due to too much or unsuitable detergent: 1. Turn off the power of the washing machine. 2. Press the Power button. 3. Press the SPIN button.
How to solve LE error on Daewoo Washer?
If your Daewoo washer is displaying the LE error, it means the Start/Hold button is pressed while the door is opened. Close the door.
What to do if my Daewoo Washer shows E2 error?
If your Daewoo washer is displaying the E2 error, the water is being supplied continuously due to an inferior valve inlet. You should change the valve inlet.
How to fix E4 error on Daewoo DWD-FD1412?
If your Daewoo washer is displaying the E4 error, water is leaking from the tub or the hose drain. Check the leak of the tub or the hose drain, then change the tub or the hose drain.
What to do if my Daewoo Washer does not start?
If your Daewoo washer isn't starting, ensure the power cord is securely plugged into the wall outlet. Also, check your house fuse or circuit breaker, and reset it if necessary. Finally, make sure the water supply tap is turned on.
Appliance fitted with transit bolts to prevent internal damage during transport.
Guidance on the proper location and clearance for installing the washing machine.
Instructions for connecting the water inlet hose to the appliance.
Guidelines for correctly installing the drain hose for proper water drainage.
Procedure to ensure the washing machine is level to prevent noise and vibration.
Instructions for cleaning the exterior and interior of the washing machine.
Steps to prevent damage to the washer when stored in freezing temperatures.
Procedure for cleaning the water inlet filter to prevent 'IE' error messages.
Guide to cleaning the drain filter to ensure smooth machine operation.
How to clean the detergent case and inlet box recess.
Advice on cleaning the washing drum to prevent limescale and rust.
Steps to remove and replace the door lock switch assembly.
Procedure for accessing and removing the heater and thermistor components.
Instructions for disassembling the BLDC motor.
Steps for removing the drain pump from the washing machine.
Exploded view and parts list for the box inlet assembly.
Exploded views and parts lists for front panel assemblies across various models.
Detailed part codes for PCB assemblies (Dongsuh and Newmotech).
Exploded views for cabinet front, cabinet, tub, and plate assemblies.
Explanation of buttons and programs on the control panel for DWD-FD141X models.
Explanation of buttons and programs on the control panel for DWD-FD145X models.
Explanation of buttons and programs on the control panel for DWD-F147X models.
Diagram showing the sequence of washing operations for different courses.
Detailed sequence chart illustrating the 'Islamic Rinse' option.
Procedures for checking PCB, water level frequency, spinning, and durability tests.
Methods for testing the spinning speed and repetitive operation of the washer.
General| Spin Speed | 1400 rpm |
|---|---|
| Energy Efficiency Class/Rating | A |
| Noise Level (Washing) | 56 dB |
| Number of Programs | 15 |
| Type | Washer Dryer |
| Dimensions (H x W x D) | 850 x 595 x 590 mm |
To Next Page