To Next PageTo Next PageWhat does error code E8 mean on a Daewoo DWD-M8011?
If your Daewoo Washer displays 'E8', the motor might not be connected correctly, or it may be faulty. Check the motor's connector and replace the motor if necessary.
How to fix Daewoo DWD-M8011 when the program does not start?
If the Daewoo Washer program doesn't start, make sure the plug is tightly inserted. Also, check if there was a power failure, as the program should resume when power returns. Ensure the loading door is properly closed (you should hear a click), and that no laundry is trapped. Verify that you've selected a program and pressed the Start/Hold button.
What to do if my Daewoo DWD-M8011 is not draining?
If your Daewoo washing machine isn't draining, inspect the drain hose for kinks or clogs; straighten and clean it if necessary. Additionally, the pump filter might be clogged, so ensure you clean the pump filter.
What to do if my Daewoo DWD-M8011 Washer program does not start?
If the program on your Daewoo Washer isn't starting, consider the following possible causes: * The plug may be loose or not plugged in. Insert the plug tightly. * There may be a power failure. An interrupted program will resume when the power returns. * The loading door might not be closed properly. Check if any laundry is trapped in the door and ensure the loading door is fully closed (you should hear a click). * A program may not have been selected. Select the desired program. * The Start/Hold button may not have been pressed. Press the Start/Hold button.
Why is water not entering my Daewoo washing machine?
If water isn't entering your Daewoo washing machine, check these possible causes: * The water tap may not be turned on. Turn the water tap on. * The inlet hose might be kinked or folded. Straighten the inlet hose. * The filter in the water inlet may be blocked. Clean the water inlet filter.
What does UE error mean on a Daewoo Washer?
If your Daewoo Washer displays 'UE', it means the laundry is concentrated to one side of the drum during the spin cycle. To fix this, rearrange the laundry.
Why is foam coming out of my Daewoo Washer detergent case?
If foam is coming out of the detergent case of your Daewoo washing machine, it's likely due to using too much detergent or an unsuitable detergent. Repeat the Rinse cycle to resolve this.
What does error E4 mean on a Daewoo DWD-M8011?
If your Daewoo Washer displays 'E4', it indicates a water leak from either the tub or the drain hose. Check both for leaks and replace the leaking component.
What to do if foam comes out of the detergent case of my Daewoo DWD-M8011 Washer?
If foam is coming out of the detergent case of your Daewoo Washer, it's likely due to: * Using too much detergent or an unsuitable detergent. Repeat the Rinse cycle.
What does LE error mean on a Daewoo Washer?
If your Daewoo Washer displays 'LE', it could be that the Start/Hold button was pressed while the door was open; close the door. Alternatively, the switch door lock may be faulty, or the PCB ASS’Y isn't checking the door lock, requiring component changes.
General| Loading type | Front loading |
|---|---|
| Capacity | 8 kg |
| Spin speed | 1000 RPM |
| Number of Programs | 15 |
| Dimensions (H x W x D) | 85 x 60 x 59 cm |
| Weight | 68 kg |
| Type | Front Load |
| Energy Rating | A |
