Daewoo DWD-M8013 - User Manual

Questions and Answers

A
Antonio WalkerSep 19, 2025
What does H5 error mean on a Daewoo Washer?
- M
  martinezpaulSep 22, 2025
  If your Daewoo Washer displays 'H5', the water temperature is over 45°C in the delicate & wool course, possibly due to a faulty thermistor wash. Consider replacing the thermistor wash.
R
Robert BakerAug 25, 2025
How to fix Daewoo Washer when the program does not start?
- C
  Claire WhiteAug 25, 2025
  If the Daewoo Washer program doesn't start, make sure the plug is tightly inserted. Also, check if there was a power failure, as the program should resume when power returns. Ensure the loading door is properly closed (you should hear a click), and that no laundry is trapped. Verify that you've selected a program and pressed the Start/Hold button.
S
Shelby WaltersAug 25, 2025
What to do if my Daewoo DWD-M8013 Washer is not draining?
- B
  Brittney GarciaAug 26, 2025
  If your Daewoo washing machine isn't draining, inspect the drain hose for kinks or clogs; straighten and clean it if necessary. Additionally, the pump filter might be clogged, so ensure you clean the pump filter.
J
James HansenAug 27, 2025
What to do if my Daewoo Washer program does not start?
- J
  Jon CarpenterAug 27, 2025
  If the program on your Daewoo Washer isn't starting, consider the following possible causes: * The plug may be loose or not plugged in. Insert the plug tightly. * There may be a power failure. An interrupted program will resume when the power returns. * The loading door might not be closed properly. Check if any laundry is trapped in the door and ensure the loading door is fully closed (you should hear a click). * A program may not have been selected. Select the desired program. * The Start/Hold button may not have been pressed. Press the Start/Hold button.
J
Jordan CampbellSep 23, 2025
What does H6 error mean on a Daewoo Washer?
- K
  Karen LeSep 23, 2025
  If your Daewoo Washer displays 'H6', the heater wash isn't working, meaning the water temperature doesn't rise over 2°C within 15 minutes. You may need to replace the heater wash.
A
Anthony BrownSep 23, 2025
What does H8 error mean on a Daewoo DWD-M8013?
- T
  Timothy DavisSep 23, 2025
  If your Daewoo Washer displays 'H8', the heater may have operated without water in the tub. Check the water level and the heater wash.
B
bmartinezSep 10, 2025
Why is foam coming out of my Daewoo Washer detergent case?
- H
  Heather JamesSep 10, 2025
  If foam is coming out of the detergent case of your Daewoo washing machine, it's likely due to using too much detergent or an unsuitable detergent. Repeat the Rinse cycle to resolve this.
B
brian64Sep 12, 2025
What does error E4 mean on a Daewoo DWD-M8013 Washer?
- D
  Daniel DudleySep 12, 2025
  If your Daewoo Washer displays 'E4', it indicates a water leak from either the tub or the drain hose. Check both for leaks and replace the leaking component.
J
Joann WarrenSep 3, 2025
What to do if foam comes out of the detergent case of my Daewoo Washer?
- R
  Robert HernandezSep 4, 2025
  If foam is coming out of the detergent case of your Daewoo Washer, it's likely due to: * Using too much detergent or an unsuitable detergent. Repeat the Rinse cycle.
T
tharrisSep 1, 2025
What does LE error mean on a Daewoo DWD-M8013?
- C
  Cassandra SmithSep 2, 2025
  If your Daewoo Washer displays 'LE', it could be that the Start/Hold button was pressed while the door was open; close the door. Alternatively, the switch door lock may be faulty, or the PCB ASS’Y isn't checking the door lock, requiring component changes.