Daewoo DWD-M8013 - User Manual

16 pages

Save Page as PDF

To Next Page

INSTRUCTION MANUAL

DWD-M8011/DWD-M8012/DWD-M8013

Washing Machine Instruction Manual

CONTENTS Page

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.

DAEWOO washers are easy to use, save time, and help you manage your home better.

This manual contains valuable information about how to operate and maintain your washer properly and safely.

Please read it carefully.

󱇲 Economic washing system

The washing machine determines the water level and washing time

automatically by sensing the amount of laundry and water temperature

in order to minimize energy and water consumption.

󱇲 Low noise system

The washing machine minimizes the spinning noise level by sensing

the amount of unbalance of laundry.

󱇲 Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential parts inside, the

washer sterilizes up to 99.9% as is done by boiling wash.

󱇲 Air bubble washing(Option)

This is an advanced technology that generates millions of air bubbles inside the drum on washing

sequence, and the bubbles dissolve the detergent particles completely and cleanse all the soil in

clothes gently and neatly.

PARTS AND FEATURES.................................................................................................................2

WASHER SAFETY...........................................................................................................................3

INSTALLATION INSTRUCTIONS....................................................................................................4

ELECTRICAL REQUIREMENTS .....................................................................................................6

OPERATING YOUR WASHER ........................................................................................................6

THE FUNCTIONS OF THE CONTROL PANEL...............................................................................8

PROGRAMS AND FUNCTIONS......................................................................................................9

WASHING PROCEDURE AND PROGRAM SELECTION.............................................................10

MAINTENANCE .............................................................................................................................11

HOW TO CLEAN THE FILTER ......................................................................................................12

REMOVING STAINS......................................................................................................................13

TROUBLE SHOOTING ..................................................................................................................14

SPECIFICATION............................................................................................................................15

Main Page

Questions and Answers

B
brian64Sep 12, 2025
What does error E4 mean on a Daewoo DWD-M8013 Washer?
- D
  Daniel DudleySep 12, 2025
  If your Daewoo Washer displays 'E4', it indicates a water leak from either the tub or the drain hose. Check both for leaks and replace the leaking component.
B
bmartinezSep 10, 2025
Why is foam coming out of my Daewoo Washer detergent case?
- H
  Heather JamesSep 10, 2025
  If foam is coming out of the detergent case of your Daewoo washing machine, it's likely due to using too much detergent or an unsuitable detergent. Repeat the Rinse cycle to resolve this.
R
randy74Sep 9, 2025
What does error code E2 mean on a Daewoo DWD-M8013?
- J
  Jennifer JonesSep 9, 2025
  If your Daewoo Washer displays an 'E2' error, it may be caused by a faulty valve inlet continuously supplying water. In this case, change the valve inlet. If the valve inlet is normal, the water level sensor may be faulty, and you should replace it. Additionally, the drain motor may not be working, requiring its replacement.
C
Charles StewartSep 8, 2025
What does OE error mean on my Daewoo Washer?
- S
  sandra60Sep 8, 2025
  If your Daewoo Washer displays 'OE', the drain hose might be kinked or clogged; clean and straighten it. Alternatively, the drain motor or the water level sensor could be faulty and need replacement. It's also possible that the valve inlet is working during the drain cycle, or the PCB ASS’Y isn't checking the water level, requiring component changes.
A
Angela FosterAug 23, 2025
Why is my Daewoo DWD-M8013 Washer not draining?
- M
  Michele CamachoAug 23, 2025
  If your Daewoo Washer isn't draining, it could be because: * The drain hose is kinked or clogged. Straighten and clean the drain hose. * The pump filter is clogged. Clean the pump filter.
J
Jeanette Johnson MDSep 6, 2025
What does PFE error mean on my Daewoo DWD-M8013?
- S
  sarahthompsonSep 6, 2025
  If your Daewoo Washer displays a PFE error, the drain pump filter may be clogged, so clean it. It could also mean the drain pump isn't working during the spin cycle, in which case you should change the drain pump. Using too much detergent can also cause this issue, so use the proper amount. Finally, ensure the drain hose is placed no higher than 1 meter above the floor.
A
Ashley GarzaSep 5, 2025
How to reduce noise and vibration in my Daewoo DWD-M8013 Washer?
- A
  asmithSep 5, 2025
  If your Daewoo washing machine is making serious noise and vibrating, it might be due to a few reasons. First, ensure that the transit bolts have been removed. Next, check if the washing machine is installed on an uneven floor and reinstall it on an even surface if needed. Finally, make sure the washing machine is leveled by adjusting the adjustable legs.
J
Joann WarrenSep 3, 2025
What to do if foam comes out of the detergent case of my Daewoo Washer?
- R
  Robert HernandezSep 4, 2025
  If foam is coming out of the detergent case of your Daewoo Washer, it's likely due to: * Using too much detergent or an unsuitable detergent. Repeat the Rinse cycle.
K
kelly67Sep 2, 2025
Why is my Daewoo Washer making serious noise and vibration?
- D
  Denise StevensonSep 2, 2025
  Serious noise and vibration in your Daewoo Washer can be due to several reasons: * The transit bolts may not have been removed. Remove the transit bolts. * The washing machine might be installed on an uneven floor. Reinstall the washing machine on an even floor. * The washing machine may not be leveled. Adjust the level of the washing machine using adjustable legs.
T
tharrisSep 1, 2025
What does LE error mean on a Daewoo DWD-M8013?
- C
  Cassandra SmithSep 2, 2025
  If your Daewoo Washer displays 'LE', it could be that the Start/Hold button was pressed while the door was open; close the door. Alternatively, the switch door lock may be faulty, or the PCB ASS’Y isn't checking the door lock, requiring component changes.