To Next PageTo Next PageWhat does the IE error mean on a Daewoo DWD-M8021?
When your Daewoo Washer shows 'IE', it could be due to several reasons. First, make sure the water tap is open. Next, check if the filter of the valve inlet is clogged and clean it if necessary. If these steps don't resolve the issue, you may need to change the valve inlet, the water level sensor, the drain motor (if it's running during water supply), or the PCB ASS’Y.
Why is no water entering my Daewoo DWD-M8021?
If water isn't entering your Daewoo washing machine, first, ensure the water tap is fully turned on. Check the inlet hose for any kinks or folds and straighten it out. Also, the water inlet filter may be blocked, so clean it to ensure proper water flow.
Why is the spin result unsatisfactory on my Daewoo DWD-M8021?
An unsatisfactory spin result on your Daewoo Washer may be due to the drain hose being placed too high. Ensure the drain hose is placed under 1 meter above the floor.
Why is my Daewoo DWD-M8021 Washer not spinning?
If your Daewoo Washer isn't spinning, there are a couple of potential reasons: * The amount of laundry may be too small. Add more laundry to balance the load and repeat the spin cycle. * The laundry might be unbalanced. Rearrange the laundry and repeat the spin cycle. Note that heavy clothing items like bathrobes can cause the washing machine to skip or stop the spin cycle.
Why is water not entering my Daewoo washing machine?
If water isn't entering your Daewoo washing machine, check these possible causes: * The water tap may not be turned on. Turn the water tap on. * The inlet hose might be kinked or folded. Straighten the inlet hose. * The filter in the water inlet may be blocked. Clean the water inlet filter.
What to do if my Daewoo DWD-M8021 Washer program does not start?
If the program on your Daewoo Washer isn't starting, consider the following possible causes: * The plug may be loose or not plugged in. Insert the plug tightly. * There may be a power failure. An interrupted program will resume when the power returns. * The loading door might not be closed properly. Check if any laundry is trapped in the door and ensure the loading door is fully closed (you should hear a click). * A program may not have been selected. Select the desired program. * The Start/Hold button may not have been pressed. Press the Start/Hold button.
What to do if my Daewoo DWD-M8021 Washer is not draining?
If your Daewoo washing machine isn't draining, inspect the drain hose for kinks or clogs; straighten and clean it if necessary. Additionally, the pump filter might be clogged, so ensure you clean the pump filter.
How to fix Daewoo DWD-M8021 when the program does not start?
If the Daewoo Washer program doesn't start, make sure the plug is tightly inserted. Also, check if there was a power failure, as the program should resume when power returns. Ensure the loading door is properly closed (you should hear a click), and that no laundry is trapped. Verify that you've selected a program and pressed the Start/Hold button.
General| Type | Front Load |
|---|---|
| Capacity | 8 kg |
| Spin Speed | 1200 RPM |
| Energy Rating | A+++ |
| Noise Level (Washing/Spinning) | 58 dB / 78 dB |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Display | LED |
| Programs | Cotton, Synthetics, Delicate, Wool, Quick, Rinse, Spin |
