To Next PageTo Next PageWhy is no water being supplied to my Daewoo Washer?
If water isn't filling your Daewoo Washer and a buzzer sounds with a lit lamp after 30 minutes, check a few things. First, make sure the inlet hose is connected and the water tap is open. Then, check if the inlet hose or water tap are frozen. Ensure the water supply hasn't been shut off. Lastly, inspect the inlet hose filter for any blockages from foreign matter.
Why is my Daewoo DWF-800 Washer not spinning?
If your Daewoo Washer isn't spinning, it might be due to a few reasons. Check if the clothes are bunched up on one side of the tub, causing an imbalance. Also, make sure the washing machine is on a level floor and not experiencing excessive vibration. Finally, ensure that the lid is completely closed.
Why is water not supplied to my Daewoo DWF-800 Washer?
Several factors can cause water supply issues. The filter of the water inlet valve might be clogged with dirt, so cleaning the filter may help. Alternatively, the water inlet valve itself could be defective, requiring a replacement. Check for improper connections of the connector or the terminal and ensure they are properly connected. In some cases, the P.C.B AS may be defective, necessitating a replacement, or the lead wires could be defective, also requiring replacement.
What to do if the water inlet valve is defective in my Daewoo Washer?
If the water inlet valve is defective, you should replace it.
What to do if the triac of P.C.B is defective in my Daewoo DWF-800 Washer?
If the triac of the P.C.B is defective, replace the P.C.B ASS’Y.
How to fix a defective air tube in my Daewoo Washer?
If the air tube is defective, replace it.
What to do if the pressure switch is defective in my Daewoo DWF-800?
If the pressure switch is defective, you should replace it.
Lists optional accessories provided with the washing machine for user convenience.
Outlines user duties for safe operation and appliance care, including electrical and environmental considerations.
Guidelines for choosing a suitable installation site, considering floor stability and temperature.
Instructions on how to connect the drain hose for both non-pump and pump models.
Critical safety warning about electrical shock risks and proper connection procedures.
Details the importance of proper grounding and how to achieve it using the provided cord.
Step-by-step guide for connecting the water inlet hose to standard taps.
Instructions for connecting the inlet hose to screw-type water taps.
Advice on preparing garments before loading, such as closing zippers and emptying pockets.
Guidance on separating clothes by soil level, color, and fabric type for optimal washing.
Recommendations for proper loading techniques to ensure balance, cleaning, and prevent damage.
General washing program using a sensor to adjust time, water, and spin.
Suitable for tough stains and items like jeans, sportswear, and rucksacks.
Reduces water and time consumption for lightly soiled clothes.
Program designed for suit clothes, with specific limitations on weight and detergent.
Effective for heavily soiled items, can be combined with other programs like FUZZY or HEAVY.
Allows manual adjustment of the washing duration for specific cycles.
Enables adjustment of the number of rinse cycles performed during a wash.
Lets users set the duration for the spin drying phase of the wash cycle.
Instructions for cleaning both the exterior and interior of the washing machine.
Procedures for winterizing the washer to prevent freezing damage during storage or moving.
Advice on how to prepare the washer for extended periods of non-use to prevent issues like flooding.
Step-by-step guide to remove and clean the lint filter located in the filter frame.
Instructions for cleaning the filter at the water inlet to prevent leaks and ensure proper water flow.
Guide on cleaning the drain filter, crucial for preventing drain problems in pump models.
General guidelines and principles to follow for effective stain removal from laundry.
A detailed table listing common stains and recommended methods for their removal.
A checklist of common problems and their potential solutions before contacting service personnel.
Clarifies normal operating sounds that might be mistaken for malfunctions.
General
