3) Refrigerator Bottom Light
4) Wine Holder
5) Shelves
* Snap out the bottom hook of light cover with a flat tip screw driver.
* Hold down the light cover to pull out.
* Change the light bulb.
(Assembling is the reverse order of disassembling.)
* Remove two screw caps on the top of Wine holder with a (-) driver.
* Unscrew 2 screws with a (+) dirver.
* Hold end of wineholder and pull up smoothly after seperating completely fixed hook.
(Assembling is the reverse order of disassembling.)
* Pull forward shelves and lift up a little to remove.
(Freezer shelves are the same way.)
- 48 -
To Next Page
Loading...
