EasyManua.ls Logo

Daewoo G25E-3 - Service Manual

Daewoo G25E-3
205 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation &
Maintenance Manual
LIFT TRUCKS
D20S-3, D25S-3, D30S-3, D33S-3
G20E-3, G25E-3, G30E-3
GC20E-3, GC25E-3, GC30E-3
G20P-3, G25P-3, G30P-3, G33P-3
GC20P-3, GC25P-3, GC30P-3
D32S-3 (6,500lb@24"L.C.)
G32E-3 (6,500lb@24"L.C.)
G32P-3 (6,500lb@24"L.C.)
GC32E-3 (6,500lb@24"L.C.)
GC32P-3 (6,500lb@24"L.C.)
SB2302E06

Table of Contents

Other manuals for Daewoo G25E-3

Questions and Answers

Summary

Foreword

Literature Information

Manual storage and content guidelines.

Safety Section

Important Safety Information

Basic safety rules, hazard identification, and warnings.

Warning Signs and Labels

Explanation of safety signs and labels on the lift truck.

General Warning to Operator

General safety rules and warnings for lift truck operation.

Parking brake

Instructions for engaging and releasing the parking brake.

Avoiding Lift Truck Tipover

Factors affecting lift truck stability and how to prevent tipover.

Seat Belt

Information on seat belt inspection, maintenance, and proper use.

General Section

Specifications

Detailed technical specifications for various lift truck models.

Noise and Vibration

Data on noise levels and vibration values for different models.

Capacity Chart

Charts showing load capacity based on mast height and load center.

Operation Section

Operators Station and Monitoring Systems

Overview of instrument panel indicators and gauges for Diesel and LPG/Gas engines.

Lift Truck Controls

Control elements of the lift truck, including pedals and levers.

Refueling

Procedures for refueling gasoline, diesel, and LP-Gas lift trucks.

Before Starting the Engine

Walk-around inspection steps before operating the lift truck.

Starting the Engine

Pre-start conditions and engine starting procedures.

Dual Fuel System (If G424 Dual Fuel Engine Equipped)

Instructions for switching between gasoline and LP-Gas fuel systems.

Lift Truck Operation

General operation of the lift truck with power shift transmission.

Advanced Diagnostics

Information on the MI-04 system and diagnostic fault codes.

Operating Techniques

Practical methods for operating the lift truck, such as inching and lifting.

Parking the Lift Truck

Step-by-step instructions for parking the lift truck safely.

Towing Information

Procedures and warnings for towing a disabled lift truck.

Maintenance Section

Inspection, Maintenance and Repair of Lift Truck Forks

Guidelines for inspecting, maintaining, and repairing lift truck forks.

Torque Specifications

Torque values for various fasteners and components.

Fuel Specifications

Recommended fuels and their specifications for lift trucks.

Lubricant Information

Guidelines for selecting appropriate lubricants.

Maintenance Intervals

Schedule of maintenance tasks based on service hours or time intervals.

Quick Reference to Maintenance Schedule

A summary table of all maintenance tasks and their intervals.

Fuses, Bulbs, Circuit Breaker & Relay - Change, Reset

Procedures for changing fuses, bulbs, and resetting circuit breakers/relays.

Priming the Fuel System (Diesel Engine Only)

Procedure for bleeding air from the diesel fuel system.

Tires and Wheels (D, G-Series) - Inspect, Check

Inspection of tires and wheels for wear, damage, and inflation.

Parking Brake - Test, Adjust

Steps for testing and adjusting the parking brake.

Forks - Inspect

Detailed inspection procedures for forks, including crack detection and angle checks.

Summary

Foreword

Literature Information

Manual storage and content guidelines.

Safety Section

Important Safety Information

Basic safety rules, hazard identification, and warnings.

Warning Signs and Labels

Explanation of safety signs and labels on the lift truck.

General Warning to Operator

General safety rules and warnings for lift truck operation.

Parking brake

Instructions for engaging and releasing the parking brake.

Avoiding Lift Truck Tipover

Factors affecting lift truck stability and how to prevent tipover.

Seat Belt

Information on seat belt inspection, maintenance, and proper use.

General Section

Specifications

Detailed technical specifications for various lift truck models.

Noise and Vibration

Data on noise levels and vibration values for different models.

Capacity Chart

Charts showing load capacity based on mast height and load center.

Operation Section

Operators Station and Monitoring Systems

Overview of instrument panel indicators and gauges for Diesel and LPG/Gas engines.

Lift Truck Controls

Control elements of the lift truck, including pedals and levers.

Refueling

Procedures for refueling gasoline, diesel, and LP-Gas lift trucks.

Before Starting the Engine

Walk-around inspection steps before operating the lift truck.

Starting the Engine

Pre-start conditions and engine starting procedures.

Dual Fuel System (If G424 Dual Fuel Engine Equipped)

Instructions for switching between gasoline and LP-Gas fuel systems.

Lift Truck Operation

General operation of the lift truck with power shift transmission.

Advanced Diagnostics

Information on the MI-04 system and diagnostic fault codes.

Operating Techniques

Practical methods for operating the lift truck, such as inching and lifting.

Parking the Lift Truck

Step-by-step instructions for parking the lift truck safely.

Towing Information

Procedures and warnings for towing a disabled lift truck.

Maintenance Section

Inspection, Maintenance and Repair of Lift Truck Forks

Guidelines for inspecting, maintaining, and repairing lift truck forks.

Torque Specifications

Torque values for various fasteners and components.

Fuel Specifications

Recommended fuels and their specifications for lift trucks.

Lubricant Information

Guidelines for selecting appropriate lubricants.

Maintenance Intervals

Schedule of maintenance tasks based on service hours or time intervals.

Quick Reference to Maintenance Schedule

A summary table of all maintenance tasks and their intervals.

Fuses, Bulbs, Circuit Breaker & Relay - Change, Reset

Procedures for changing fuses, bulbs, and resetting circuit breakers/relays.

Priming the Fuel System (Diesel Engine Only)

Procedure for bleeding air from the diesel fuel system.

Tires and Wheels (D, G-Series) - Inspect, Check

Inspection of tires and wheels for wear, damage, and inflation.

Parking Brake - Test, Adjust

Steps for testing and adjusting the parking brake.

Forks - Inspect

Detailed inspection procedures for forks, including crack detection and angle checks.

Daewoo G25E-3 Specifications

General IconGeneral
BrandDaewoo
ModelG25E-3
CategoryEngine
LanguageEnglish

Related product manuals