Daewoo G25E-3 Service Manual

Maintenance Section
-199-
Every 4500 Service Hours or two Years
Replace Oxygen Sensor
(G424E/G430E Engine Only)
G424E Engine
G430E Engine
1. Stop engine and wait until the exhaust pipe and
exhaust pipe is cooled.
2. Disconnect the electrical connector of oxygen
sensor
3. Remove oxygen sensor
4. Assemble new oxygen sensor
Tightening torque : 45 N•m (32.5 lb•ft)
5. Connect the electrical connector of oxygen
sensor

Daewoo G25E-3 Specifications

General

Brand	Daewoo
Model	G25E-3
Category	Engine
Language	English