To Next PageTo Next Page
Need help?Do you have a question about the Daewoo G32P-3 and is the answer not in the manual?
Basic safety rules and precautions for operation, maintenance, and repair. Identifies hazard warnings.
Covers general hazards like warning tags, protective equipment, load width, clothing, loose items, and hand signals.
Explains lift truck stability, center of gravity, and factors affecting stability and tipover.
Provides instructions on operator restraint system use, holding tight, and bracing feet during a tipover.
Details the instrument panel indicators and gauges for Diesel and LPG/Gas engines.
Explains controls like direction lever, pedals, and lift/tilt/sideshift controls.
Provides instructions for refueling gasoline or diesel engines, including safety warnings.
Covers walk-around inspection, checking fluid levels, and testing safety devices before starting.
Details pre-start conditions and procedures for starting gasoline and diesel engines.
Guides on operating the lift truck with power shift transmission, including travel and stopping.
Provides guidelines for inspecting, maintaining, and repairing lift truck forks, including causes of failure.
Lists torque specifications for metric hardware, hose clamps, bolts, nuts, and taperlock studs.
Provides information on coolant, antifreeze, and proper cooling system maintenance.
Outlines the recommended maintenance schedule based on service hours or time intervals.
Details daily checks for engine fluid leaks, oil level, coolant level, and air cleaner indicator.
Covers initial engine oil and filter change, transmission oil, and drive axle oil replacement.
Provides detailed technical specifications for various lift truck models.
Lists noise levels and vibration values for different lift truck models and operating conditions.
Presents load capacity charts based on mast height, tire type, and load center.
Explains the operator's warning plate, identification plate, and mast abbreviations.
General
