To Next PageTo Next Page
Need help?Do you have a question about the Daewoo Forkilt and is the answer not in the manual?
Basic safety precautions and hazard identification for operation and maintenance.
Key operational safety warnings and guidelines for safe lift truck use.
Instructions for engaging and disengaging the parking brake, and its importance.
Procedures to follow to minimize injury or death in the event of a tipover.
Detailed technical specifications for various lift truck models, covering dimensions, performance, and drive systems.
Load capacity charts for various models based on mast height and load center.
Data on noise levels and vibration values for different lift truck models.
Overview of the instrument panel and indicators for diesel and LPG/GAS engines.
Comprehensive walk-around inspection checklist and pre-start procedures for safe operation.
Step-by-step instructions for starting gasoline, LP-Gas, and diesel engines, including prestart conditions.
Guidance on operating the lift truck, including transmission, controls, and safe travel practices.
Troubleshooting guide for common engine problems, including probable causes and corrective actions.
Information on reading diagnostic fault codes (DFC) and understanding the Malfunction Indicator Lamp (MIL).
Guidelines for inspecting, maintaining, and repairing lift truck forks, including causes of failure.
Torque values for metric and standard fasteners, hose clamps, and taperlock studs.
Comprehensive schedule of required maintenance tasks based on service hours or time intervals.
Routine daily checks including engine fluid leaks, oil level, coolant level, and walk-around inspection.
Procedure for cleaning and changing the engine cooling system coolant.
Guidelines for inspecting forks for wear, damage, cracks, and proper alignment.
General
