EasyManua.ls Logo

Daewoo Novus N7DVF User Manual

Daewoo Novus N7DVF
251 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FOREWORD
WewouldliketotakethisopportunitytothankyouforchoosingaTATA
DAEWOO product and assure you for our continuing interest in your
motoringpleasureandsatisfaction.
This manual has been prepared to acquaint you with the operation and
maintenance of your new TATA DAEWOO TRUCK and to provide
importantsafetyinformation.Weurgeyoutoreaditcarefullyandfollow
the recommendation to help assure the most enjoyable, safe and
troublefreeoperationofyourvehicle.
When it comes to service, remember that your TATA DAEWOO dealer
knowsyourvehiclebestandisinterestedinyourfullsatisfaction.
This manual should be considered as a permanent part of your vehicle,
andmustremainwiththevehicleatthetimeofresale.
All information,illustrations and specifications contained in this manual
are based on the latest product information available at the time of
publication.
Therightisreservedtomake
changesatanytimewithoutnotice.
TATADAEWOOCOMMERCIALVEHICLE
FOREWORD
https://www.truck-manuals.net/

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Daewoo Novus N7DVF and is the answer not in the manual?

Daewoo Novus N7DVF Specifications

General IconGeneral
BrandDaewoo
ModelNovus N7DVF
CategoryTrucks
LanguageEnglish

Summary

HOW TO HANDLE THE VEHICLE

OPERATION OF NEW VEHICLE

Instructions for operating a new vehicle, including oil change intervals and initial operation guidelines.

DRIVING

BEFORE STARTING THE ENGINE

Checklist of items to inspect before starting the engine.

STARTING AND STOPPING THE ENGINE

Procedures for starting and stopping the engine in various conditions.

BEFORE DRIVING OFF

Pre-drive checks including steering, brakes, wipers, and indicators.

WHILE TRAVELING

Guidelines for safe driving and checks during travel.

INSPECTION AND MAINTENANCE

DAILY CHECK BEFORE DRIVING

Daily inspection checklist for safe and dependable operation before driving.

PERIODIC INSPECTION AND MAINTENANCE

Scheduled maintenance tasks for engine oil and filters.

TRANSMISSION OIL

Procedures for checking and changing transmission oil.

REAR AXLE OIL

Procedures for checking and changing rear axle oil.

INSPECTION AND ADJUSTMENT OF CLUTCH PEDAL

Steps for inspecting and adjusting clutch pedal free play.

ADJUSTMENT AND CONTROL OF BRAKE

Procedures for adjusting brake lining clearance.

TROUBLESHOOTING AND CORRECTIONS

ENGINE AND RELATED PARTS

Troubleshooting common engine issues like starting problems, overheating, and smoke.

CHASSIS AND RELATED PARTS

Troubleshooting issues related to chassis, steering, and brakes.

MISCELLANEOUS CONTROLS AND OPTIONS

OPERATION OF DUMP SYSTEM

Instructions for operating the dump system, including raising and lowering the deck.

SPECIFICATIONS AND SERVICE DATA

POWER TRAIN

Specifications for engine, clutch, transmission, axles, and wheels.

RECOMMENDED LUBRICANTS

Recommended fluids and capacities for various lubrication points.

Related product manuals