Daewoo KBE-6R2SSS User Manual

16
Temperature Sensor Removal
•Removetheovendoor(s)asdescribedonpage4.
•Removetheovenracksfromtheovenchamber.
Rack Support Removal
•Removethescrewsthatholdtheracksupport(ontheappropriateside)inplace.Becarefulnottoscratchtheinside
surface of the oven when removing it.
Temperature sensor removal
•Removethescrewsthatholdthetemperaturesensorinplace.
•Whenremovingthetemperaturesensor,pullthewiresattachedtothesensorgentlytowardyouthroughtheholeinthe
back of the oven to expose the connector. Do not pull hard on the wires because the connector may come loose inside the
oven wall. Use a screwdriver, if necessary, to move the insulation around behind the hole to allow the connector to slide
out into the oven chamber.
•Disconnectthetemperaturesensorwiresattheconnectorandremovethetemperaturesensor.
•Whenreinstallingthetemperaturesensor,gentlypushtheconnectorandexcesswirethroughtheaccessholeand
insulation at the back of the oven.
•Tightenthetemperaturesensorintoplacewiththeexistingmountingscrews.
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 16 2014-07-18 오후 4:34:35

Daewoo KBE-6R2SSS Specifications

General

Brand	Daewoo
Model	KBE-6R2SSS
Category	Oven
Language	English