15
12. DISASSEMBLY AND ASSEMBLY
1. To remove cabinet
1) Remove four screws on cabinet back.
2) Push the cabinet backward.
2. To remove door ASS'Y
1) Remove each two screws (total 4EA) on left and right
sides.
2) Remove spring hinges in both sides.
* It is easy to remove the bottom of spring firstly and to
set the top of spring firstly.
3) Remove HINGE TOP *R and HINGE TOP *L.
* HINGE TOP must be connected to the inside of DOOR.
4) Reverse the above steps for reassembly.
3. To remove C-Panel ASS'Y
1) Remove the screws.
2) Slide the C-PANEL in the direction of left and pull out
forward.
3) Reverse the above steps for reassembly.
SPRING HINGE
To Next Page
Loading...
