Daewoo KOR-6S2BR-1 - Pre-set Function; Auto Menu

3) Press"Microwave " once;
4) Turn " " to choose 80% microwave power till "P80" display;
5) Press "START/+30SEC./CONFIRM" to confirm;
6) Turn " " to adjust the cooking time of 7 minutes;
7) Press "START/+30SEC./CONFIRM" to start cooking.
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting should not
be set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press"Microwave " once;
b. Turn " " to choose 80% microwave power till "P80" display;
c. Press "START/+30SEC./CONFIRM" to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then
do as following:
5) Press " CLOCK/PRE-SET ", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within 0--59.
4) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " CLOCK/PRE-SET ". The hour figures flash;
7) Press " START/+30SEC./CONFIRM " to finish setting. ":" will flash, buzzer will
ring twice when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
7. Pre-set Function
1) In waiting states, turn " " right to choose the menu from "A-1" to "A-8";
2) Press "START/+30SEC./CONFIRM " to confirm the menu you choose;
3) Turn " " to choose the food weight;
4) Press "START/+30SEC./CONFIRM " to start cooking;
5) After cooking finish, the buzzer sounds five times.
8. Auto Menu