NOTE: Always use the tongs provided to remove the basket or rack from the
Glass Bowl (11) and use the supplied Lid Stand (9) for supporting the lid during
and immediately after cooking.
DO NOT use any other accessories with this appliance for example trays, bowls
or aluminium foil linings.
Before the First Use of Your Air Fryer
• Remove all packing materials and discard responsibly.
• Ensure all parts are present see Description of Parts above.
• Check that there is no damage to the mains cable or product.
• Ensure that you clean your Air Fryer before first and every use, wash the bowl
and accessories in hot soapy water with a sponge or soft cloth, rinse and dry
thoroughly.
The Extension Ring (5) is supplied packed around the Glass Bowl (11) inside the
Base (10) during transit. Ensure that the Extension Ring (5) is removed from
the Base (10) before use – failure to remove the Extension Ring (5) from
around the Glass Bowl (11) may cause damage to the Air Fryer and void your
Warranty.
WARNING! DO NOT immerse the lid/motor assembly in water or any
other liquid.
NOTE: During initial use you may notice a slight odour due to the burning off of
manufacturing residues. This is completely normal and will disappear after a short
time.
IMPORTANT! This appliance has a Safety
Interlock Switch (1) built into the carrying handle
which will prevent the appliance operating unless
the lid handle is in the fully folded down
(horizontal) position as shown right:
The Extension Ring (5) is stored in
transit around the Glass Bowl (11) and
must be removed before use.
DO NOT remove the silicon band from
around the outside of the ring. The
Silicon band provides heat protection
whilst handling the Extension Ring (5).
To Next Page
Loading...
