The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black. The wire which
is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red. The wire which is
coloured Green and Yellow must be connected to the terminal
which is marked with the letter E or coloured Green.
Before refitting the plug cover check that there are no cut or stray
strands of wire inside the plug. Use a 13 Amp BS 1362 fuse, only
BSI or
ASTA approved fuses should be used. If you are in any way unsure
which plug or fuse to use, always refer to a qualified electrician.
Note: After replacing or changing a fuse on moulded plug which
has a fuse cover, the cover must be refitted to the plug, the
appliance must not be used without a fuse cover.
To Next Page
Loading...
