It is advised to run the appliance at maximum temperature for approximately
15 minutes by rotating the Timer Control (6) to 15 minutes and Temperature
Control (4) fully clockwise, to remove any residual lubricants placed on the
elements to prevent corrosion during transit.
Description of Controls
Rotate the Hot Plate Control (3) to use either the
Small, Large or both Hot Plates.
Rotate the Temperature Control (4) to set the
oven cooking temperature between 100
⁰
C and
230
⁰
C.
Rotate the Oven Function Control (5) to select the
upper heating element, the lower heating
element, a combination of both.
Rotate the Timer Control (6) to set the cooking
time up to 60 minutes for both Hot Plates and
Oven. At the end of the cooking time a bell will
sound and the appliance will switch off.
To Next Page
Loading...
