Setting up Your Air Fryer
1. Place the air fryer on a solid, level, heat resistant
surface clear of all obstructions as described above.
2. Insert the mains plug into the nearest socket outlet.
3. Remove the Fryer Drawer (6) by pulling it by
the Handle (8). Ensure that the Trivet (7) is
placed in the bottom of the Fryer Draw (6).
Replace the Cooking Pot (6) into the Air
Fryer ensuring that it is pushed fully home.
The Air Fryer will not function if the
Fryer Drawer (6) is not placed fully into the
Air Fryer.
4. Ensure the four Silicone feet (arrowed
right) are fitted to the Trivet (7) before
inserting it into the bottom of the
Fryer Drawer (6).
Do not remove the Silicone feet before
inserting the Trivet (7) into the
Cooking Pot (6) as they help to hold
the Trivet in place and prevent
scratching of the non-stick surface,
they also lift the food clear of the base
and provide good air circulation
around the food for efficient cooking.
To Next Page
Loading...
